ReFill ROSA3D / PETG / CARBON LOOK / 1,75 mm / 1 kg
ReFill ROSA3D / PETG / CARBON LOOK / 1,75 mm / 1 kg
MASTERSPOOL STL - DOWNLOAD
PET-G CarbonLook by ROSA3D was designed for printouts in which the visual effect of the object is more important than its industrial application.
A small addition of carbon fibers used in PET-G Standard material results in print with a satin-like surface and hardly visible layers, with only a slight stiffening. A possibility of obtaining a delicate transparency in thin-walled prints is an additional advantage.
Printing with PET-G CarbonLook is characterized by a low level of stringing and excellent layer adhesion. Obtaining amazing results is possible as easily as with PET-G Standard filament. The material shows no shrinkage and doesn’t require a closed chamber. Due to a low content of carbon fibers in the material, its abrasion is lower than in case of PETG+CF, which translates into less wear on the printing nozzle.
TECHNICAL PARAMETERS
Diameter | 1.75 mm |
Diameter tolerance | +/- 0.05 mm |
Oval tolerance | +/- 0.02 mm |
Net weight | 1000g (vacuum packed with a moisture absorber) |
Print temperature | 225-250 °C |
Bed temperature | 60-80 °C |
PHYSICAL PARAMETERS
Density | 1,29 g/cm3 |
Odor | Odorless |
Tensile elongation | 5,5 % |
Tensile strength (to break) | 45 MPa |
Tensile modulus | 2980 MPa |
Notched Izod impact strength | 4.7 kJ/m2 |
Vicat softening point | 78 °C |
Color | Black |
---|---|
Weight | 1 kg |
Additional subdivision | Carbon fibres |
Diameter | 1,75 mm |