ReFill ROSA3D / ABS+ / BLACK / 1,75 mm / 1 kg
ReFill ROSA3D / ABS+ / BLACK / 1,75 mm / 1 kg
MASTERSPOOL STL - DOWNLOAD
ABS+ material is a widely applicable engineering plastic with moderate shrinkage (0.4-0.7%).
Excellent processing properties such as good flow, bright, vivid colours and very good layer adhesion allow a wide range of applications for this filament.
ABS+ has a high impact strength and is impact resistant.
ABS+ from ROSA3D gives an elegant semi-matte finish to the surface of prints. It can be smoothed with acetone.
TECHNICAL PARAMETERS
Diameter | 1.75 mm |
Diameter tolerance | +/- 0.05 mm |
Oval tolerance | +/- 0.02 mm |
Net weight | 1000g |
Print temperature | 230-270 °C |
Bed temperature | 80-110 °C |
PHYSICAL PARAMETERS
Density | 1,05 g/cm3 |
Odor | Irritating |
Tensile elongation | 2,5 % |
Tensile strength (to break) | 44 MPa |
Tensile modulus | 2276 MPa |
Thermal deformation temperature | 99 °C |